| Disk Disperser |
The pulp with 28~32% consistency is heated to 90~110°C and mixed with the chemicals. Then it enters the feed screw in the form of roundel. Through the screw-rotating disc in the disperser, the pulp is extruded into the 0.1~0.5mm gap between the fibrillating fluted moving disc and fixing one, and then outwards from the center the pulp goes through will be mechanically and physically acted intensively and evenly (rubbed and softened ).So that the hot melt material ,adhesive material and ink etc. will be peeled off from fibers and dispersed into invisible tiny granules and the pulp will be mixed the chemicals evenly. |
| Previous Next |
中文
English